Leather shoulder pads are a true classic. Let’s just mention Clint Eastwood in Dirty Harry, Steve McQueen in Bullitt, Bruce Willis in Die Hard With A Vengeance, and last but not least Don Johnson in Miami Vice. If those guys aren’t the epitome of style, then I don’t know what is. You may be wondering, but are concealed carry shoulder holsters really practical or are they just silly from yesteryear? The answer is obvious, they are perfect for concealed carry, daily transport, transport in your car and also on a hike. The shoulder holsters are versatile, comfortable, and reliable. This article will help you:

How to choose a holster

How to adjust a shoulder holster

How to use a holster

How to choose a holster

Choosing a shoulder holster is the first and most difficult step. Let’s break it down into simple steps. You can take care of it if:

You want to hide the transport but you don’t want to use a belt holster

You want to hide a large barrel, like an 8 “revolver

Want to look cool like Dirty Harry?

Let’s be honest. Belt covers can be a burden. Wearing a holster on your belt throughout the day can somehow get on your nerves, pinch, print sweat, etc. Shoulder Holster Concealed Carry may be the solution you are looking for. It’s as easy as putting on a coat. Slide your arms through the harness and you will be loosely attached to the belt. And don’t forget, you don’t have to run your gun belt through a maze of belt loops. And do you know what the best part is? Spare ammo on the other side. Hiding in a shoulder holster is as easy as putting your jacket over it and voila. If you think your weapon is larger, choose a vertical shoulder holster. The gun will be facing downward and will still be within easy reach.

The vertical shoulder holster is also a solution for people who like their guns big and loud. It denies the claim that you can’t hide an 8 “Smith & Wesson. Yes, you can in a vertical shoulder holster. And again, you have spare quick chargers on the other side. Imagine how long it would take to draw 8” of steel from your pants and compare it to a shoulder holster where you just grab, tear and pull. The same goes for 1911 shoulder holsters, a full size fit is a horizontal shoulder holster, but may be more practical on a vertical holster.

The wide variety and designs of shoulder holsters can conceal virtually any size and caliber firearm. From 357 to 45, you can bet it would work perfectly on a shoulder holster. And now, the best part about having a shoulder holster: the coolness factor. Well I admit it’s not the best part, of course the best part is the safe transportation aspect etc etc, but the TV heroes have to be given some credit for making the case look so cool. A statement to the great era of police movies.

How to adjust a shoulder holster

Now you just got your shoulder holster custom made for a 357 revolver, it has a dual speed magazine counterweight and the mahogany leather looks amazing too because you added a personal monogram to it. You unpack it and suddenly it feels like you’ve received something from IKEA. A holster, counterweight, parts, straps, harness, ugh. Not as easy as a Kydex holster that clips onto your belt, is it? Well maybe yes, but if you want something nice you have to do something about it.

Adjusting a holster for the shoulder is very important and surprisingly very easy. It can be divided into 3 steps:

Adjust harness

Attach the cover

Place the counterweight

We all come in different shapes and sizes and one thing shoulder holsters can do is they can be made to serve people even in XXXL sizes. Big boys. Your harness can be adjusted very easily for a good and secure fit. You need to make sure it is tight but not too tight because your arms and upper body will move and the harness should allow for movement. If you plan to add more layers of clothing i.e a shirt and sweater, just adjust the harness to be larger or vice versa. Make sure to use an empty platform and place the harness crossover in the middle of your back.

Make sure the straps are not twisted and are flat against your shoulders and upper back. If your holster gear has shoulder pads, make sure they are centered front to back, high on your shoulders near your neck. You may not find the perfect fit the first time you put the cover on, so pay attention to how it feels over time and adjust it. One way to test this is to stand in front of a mirror and perform a series of movements. Observe if the platform moves a lot or remains tight. Also note whether or not the harness feels comfortable when moving.

If the harness is snug enough for your satisfaction, make sure the cover is 1 to 2 inches below the armpit. Not too collapsible as it would obstruct your arm movement and not too low as it would be a burden to pull. You should be able to reach around your body and instinctively find the handle of your firearm. If you prefer a shoulder rig with belt ties (those little leather straps that go from the holster to your belt) just do the same and don’t forget to attach the ties to your belt. Their advantage is that they have a clasp so you don’t have to bother unbuckling your belt. Make sure to position the sleeve of the sleeve to your liking and don’t be distracted if the sleeve is moved back and forth, this happens sometimes and is not a problem.

Last but not least, your counterweight needs to be adjusted as well. If your shoulder rig only comes with a holster part and no bag, then the process is easy, just make sure the elastic part is not too tight and allows you to move while balancing the weight of the firearm. If you have a bag on your harness, do the same as the holster. Place it where you instinctively look for a replacement charger or fast charger. And everything is ready.

Our tip: leather shoulder holster system

If you are looking for a versatile shoulder rig made of sturdy leather that can be easily adjusted and worn comfortably, this is the one for you. You will get a platform with a holster and double charging bag, or a double speed magazine bag in the case of a revolver. It comes fully assembled so you are one step away from carrying it. And if you ever feel like carrying it with two things, you can order a left-side holster and easily mount it. The holster and bag can be attached to the belt via belt clips and all gear can be hidden under a layer of clothing.

How to use a holster

If you’ve got your shoulder rig snug and ready to go, you might come across a simple question: how do you wear a shoulder holster? The answer will be provided below, imagine right now that you are a detective and criminals see you taking off your jacket while you interrogate them and your 1911 out of 5 “sticker says” Hello! “Great, huh?

Now to the most important part. It involves 4 easy steps:

Make sure you have a baggy jacket

Make sure to keep the jacket open

Don’t forget your concealed carry permit

Hands-on hands-on practice.

The loose jacket doesn’t have to be 3 sizes bigger than you, but a little slack is always fine as this helps to avoid harness print on your back and the tighter the garment, the more huggable the cover is . But a man who likes comfort wears a comfortable jacket or shirt, so there is nothing to worry about. Even if you don the suit, you can use a shoulder holster to carry your piece of self defense and people will not realize that you are armed.

The important part of carrying a holster is the practice of drawing, keep in mind that you will have to have your jacket open to be able to quickly access the firearm. Practice this often and be aware that some movement may show your weapon, so don’t swing with your arms wide open like they do in the movies. Keep it cool and protected.

If you cover your platform with your jacket, always keep in mind that it is hidden, so you better have that permission with you. Avoid any unnecessary conflict and be armed, prepared and safe.

Shoulder holster draw

Practicing the drawing of the shoulder holster is the key. It’s easy and can be done in 3 easy steps. The key is repetition until it becomes instinct and intuition.

The first step is to clean your garment. This means sliding it with your non-dominant hand and reaching for the handle with your dominant hand at the same time. If you do not have a jacket or shirt on you, it is advisable to raise your non-dominant hand, bend it at the elbow and move it upwards, this will allow you to access your firearm more easily and will keep your non-shooting hand. safe.

The second step is to reach for the firearm and get a good grip. The thumb break can easily be broken with the thumb in the case of the horizontal shoulder holster and / or with the index finger if carried vertically.

The third part is the draw. That’s basically the simplest part as it only requires cleaning the case and attacking the target.